4
Printed in USA
MADE IN THE USA
CONFER PLASTICS, INC. FIVE YEAR WARRANTY
Confer Plastics, Inc. warrants their swimming pool ladders and steps to be free from
defects in workmanship for five years from date of purchase.
DO NOT RETURN DEFECTIVE PART TO DEALER
E-MAIL CONFER PLASTICS AT:
LADDERS@CONFERPLASTICS.COM
A PICTURE [S] OF DEFECTIVE PART, A BRIEF DESCRIPTION OF PROBLEM,
PROOF OF PURCHASE AND YOUR CONTACT INFORMATION.
INFORMATION MAY ALSO BE FAXED TO CONFER PLASTICS AT:
716-694-3102
OR MAILED TO THE ADDRESS BELOW. UPON REVIEW OF THE INFORMATION YOU
WILL BE NOTIFIED IF PART IS COVERED UNDER THE WARRANTY AND
THE SHIPPING/HANDLING CHARGES.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Confer Plastics, Inc.
97 Witmer Road
North Tonawanda, N.Y. 14120-2421
97 Witmer Road
North Tonawanda, New York 14120-2421
Toll Free U.S. 800-635-3213
FAX 716-694-3102
www.conferladders.com
SAFETY RULES
* One person on the ladder at a time
* Ladder
MUST
be installed per manufacturer
ʼ
s
instructions
* DANGER:
No Jumping or Diving from ladder
* Face ladder when entering and leaving pool
* To prevent entrapment or drowning —
DO NOT
swim through, behind or around ladder
* Ladder to be used as a swimming pool ladder only.
* Weight limit -
250 lbs maximum
*
Warning:
Exceeding the maximum weight
restriction may cause the ladder to fail.
* Consult your local Building Department before
installation of your pool and equipment.
*
DANGER:
Use a cordless drill for assembly
and installation
Never use an electric drill in or around the pool.
3-00-635-X
CP 635-52X 2/17
IMPORTANT
FOR YOUR SAFETY
* Check the contents of the carton with the Parts list
for this ladder.
* If any parts are missing call Toll Free U.S. -
800-635-3213 or visit our web site at
www.conferladders.com
*
DO NOT
attempt to assemble or install the ladder
if there are
ANY
shortages of parts or hardware.
* For proper assembly and installation follow all
instructions in the sequence shown.
* Before using the product, after assembly and
installation, go over the instructions and procedures
again to make sure nothing has been overlooked.
* Be sure and safe. The manufacturer
IS NOT
responsible for improper assembly, installation
and use.
