6
Assembly
1. Lift up the treadmill and using the ship bolts, fix it onto the connection board.
2. To install the handrail tubes firstly connect the holding wire and then plug in the armrest pipeline into the pillar
and bolt down.
3. Plug the two heartbeat lines according to right and left and then plug in the connecting lines.
4. Whilst aligning the indents to the tube also ensure both holes are aligned and fasten with M6 bolts.
Usage Instruction
Warning:
Please be sure to read the following before operating.
Do not stand on the running belt when starting the treadmill.
Please adjust the speed gradually to avoid sudden change of speed.
Please ensure the safety switch is kept on your body at all times whilst using the treadmill.
Please ensure the key pad is dry at all times to avoid the leakage of electricity.
After installation and debugging the treadmill is ready for use.
1. Place the plug in the power socket.
2. Be sure the safety switch is placed in the safety socket, press the start button to start the treadmill running.
Getting Started
1.
2.
3.
4.
