When the drying procedure begins, “REMAINING” will display the
remaining time, that is the drying procedure will finish in [X:XX]
time.
The display “-” means programme is in “Standby” status, you can
press any buttons or open the door to awaken programme.
7.
(Status display)
The four LED lights indicate the status of drying procedure.
8.
(1-24h)
Press the button continuously to delay 1-24 hours.
9.
(Min)
Press the button continuously to adjust the time of drying 20-60
minutes.
Filter
Please clean the filter when the” “ is lighting, after the dryer
stops.
Tank
Please empty the container when the ” ” is lighting, after the
dryer stops.
Select the programme
1. Press the “
” (On/Off) button. When the LED
display screen brightens up, rotate the programme knob to
select the desired programme.
2. Activate the [
], [ ] or [
] functions if necessary.
3. Press the “
” (Start/Pause) button.
4. Functions
1.
(On/Off)
Product is switched on or off.
2.
(Programmes)
Different Dryer cycle can be selected according to the user’s needs
to make the clothes have more effective drying results.
3.
(Soft)
This function will give less heat to protect sensitive textiles from
high temperature.
4.
This function will give more care to protect sensitive textiles from
being creased.
5.
(Start/Pause)
Press the button to start or pause the drying cycle.
6.
(Display)
Only light (DELAY> /REMAINING) relevant to the phase that is
currently being carried out will remain display during the drying
process.
41
40
GB
GB
