background image

Copyright 

© 

2017 

congatec 

GmbH 

 

      PA50m112 

       

18/48

The power consumption values were recorded during the following system states:

Table 7  

Measurement Description

System State

Description

Comment

S0: Minimum value

Lowest frequency mode (LFM) with minimum core voltage during 

desktop idle. 

S0: Maximum value

Highest frequency mode (HFM/Turbo Boost). 

The CPU was stressed to its maximum frequency.

S0: Peak value

Highest power spike during the measurement of “S0: Maximum value”. 

This state shows the peak value over a short period of time (worst case 

power consumption value).

Consider this value when designing the system’s power supply to 

ensure that sufficient power is supplied during worst case scenarios.

S3

Suspend to RAM state.

S5

Soft-Off state

 

Note

1.  The fan and SATA drives were powered externally.

2.  All other peripherals except the LCD monitor were disconnected before measurement.

The tables below provide additional information about the power consumption data for each of the conga-PA5 variants offered. The values are 
recorded at various operating modes.

Table 8  

Power Consumption Values

Part 

No.

Memory 

Size

H.W 

Rev.

BIOS 

Rev.

OS 

(64-bit)

CPU

Current (A) @ 12 V

Variant

Cores Base / Burst 

Freq. (GHz) 

S0: Min S0: Max S0: Peak S3

S5

048100

8 GB

A.0

PA50R019 Windows

®

 10

Atom

®

 x7-E3950

4

1.6/2.0

0.16

1.65

1.88

0.06

0.06

048101

4 GB

A.0

PA50R019 Windows

®

 10

Atom

®

 x5-E3940

4

1.6/1.8

0.28

1.38

1.46

0.04

0.04

048102

4 GB

A.0

PA50R019 Windows

®

 10

Atom

®

 x5-E3930

2

1.3/1.8

0.14

0.95

1.06

0.04

0.04

048120

8 GB

A.0

PA50R019 Windows

®

 10

Pentium

®

 N4200

4

1.1/2.5

0.28

1.15

1.89

0.04

0.03

048121

4 GB

A.0

PA50R019 Windows

®

 10

Celeron

®

 N3350

2

1.1/2.4

0.29

1.18

1.85

0.04

0.04

048122

4 GB

B.1

PA50R140 Windows

®

 10

Celeron

®

 J3455

4

1.5/2.3

0.19

1.43

1.79

0.03

0.03

048123

4 GB

A.0

PA50R019 Windows

®

 10

Pentium

®

 N4200

4

1.1/2.5

0.16

1.05

1.93

0.04

0.03

048110

8 GB

A.0

PA50R019 Windows

®

 10

Atom

®

 x7-E3950

4

1.6/2.0

0.16

1.65

1.88

0.06

0.06

048111

4 GB

A.0

PA50R019 Windows

®

 10

Atom

®

 x5-E3940

4

1.6/1.8

0.28

1.38

1.46

0.04

0.04

048112

4 GB

A.0

PA50R019 Windows

®

 10

Atom

®

 x5-E3930

2

1.3/1.8

0.14

0.95

1.06

0.04

0.04

 

Note

With fast input voltage rise time, the inrush current may exceed the measured peak current.

Summary of Contents for 048100

















































Reviews: