background image

Copyright 

© 

2017 

congatec 

GmbH 

 

      PA50m112 

       

28/48

 

Note

The battery has an adhesive tape on its shrinking tube. This tape enables the system integrator to adequately position the battery in the 

system case. The functionality of adhesive tape is time limited if exposed to higher temperatures and harsh or vibrant environment. The 

system integrator must ensure a stable position in this case.

5.2 

High Definition Audio Header

The conga-PA5 provides an HD audio header (X6). The signals are routed from an HD audio codec (Cirrus Logic CS4207). Optionally, this 
header can provide differential Line output (L1) and S/PDIF input.

Table 14   X6 Pinout Description

Pin Default Signal

Description

Optional Signal

1

MIC_L

Analog Microphone Input - Left Channel 

2

GND_HDA

Audio Ground

3

MIC_R

Analog Microphone Input - Right Channel

4

+5V_AMP

+5V Power Supply (for external speaker amplifier; max. 500mA)

5

MIC_JD

Microphone Jack Detection

6

HP_R

Headphone Line Out - Right Channel

Line Out L1-

7

GND_HDA

Audio Ground

8

HP_L

Headphone Line Out - Left Channel

Line Out L1+

9

HP_JD

Headphone Jack Detection

10

+5V

+5V Power Supply (for S/PDIF optical transmitter)

11

GND

Digital Ground for S/PDIF

12

S/PDIF

S/PDIF Output (3.3V)

S/PDIF Input (3.3V)

 

Connector Type

X6: 6x2 pins, 2.0 mm pitch, box header

Pin 12

Pin 1

Pin 2

X6

Summary of Contents for 048100

















































Reviews: