background image

Copyright 

© 

2022 

congatec 

GmbH 

 

      TCTOm01 

       

17/70

2.6 

Supply Voltage Battery Power

Table 8  

CMOS Battery Power Consumption

RTC @

Voltage

Current

-10

o

C

3V DC

 TBD µA

20

o

C

3V DC

 TBD µA

70

o

C

3V DC

 TBD µA

 

Note

1.  Do not use the CMOS battery power consumption values listed above to calculate CMOS battery lifetime. 

2.  Measure the CMOS battery power consumption of your application in worst case conditions (for example, during high temperature and 

high battery voltage). 

3.  Consider the self-discharge of the battery when calculating the lifetime of the CMOS battery. For more information, refer to application 

note AN9_RTC_Battery_Lifetime.pdf on congatec GmbH website at www.congatec.com/support/application-notes.

4.  We recommend to always have a CMOS battery present when operating the conga-TC570r.

2.7 

Environmental Specifications

Temperature (commercial variants) 

 

Operation: 0° to +60°C 

Storage: -20° to +80°C

Temperature (industrial variants)  

 

Operation: -40° to 85°C  

Storage: -40° to 85°C (up to 1 Gb Ethernet)

Temperature (industrial variants)  

 

Operation: -40° to 70°C  

Storage: -40° to 85°C (up to 2.5 Gb Ethernet)

Humidity  

 

 

 

 

Operation: 10% to 90% 

Storage: 5% to 95%

 

Caution

The above operating temperatures must be strictly adhered to at all times. When using a congatec heatspreader, the maximum operating 

temperature refers to any measurable spot on the heatspreader’s surface.

Humidity specifications are for non-condensing conditions.

Summary of Contents for COM Express conga-TC570r







































































Reviews: