Copyright
©
2020
congatec
AG
ICWLm12
53/62
5.15
Chassis Intrusion Connector
The conga-IC370 provides pin header X1 for chassis intrusion detection. Connect normally-open switch to X1.
Table 48 X1 Pinout Description
Pin
Function
1
GND
2
INTRUDER#
Connector Type
X1: 2.54 mm, 2-pin connector (Molex 22-27-2021)
5.16
Feature Header
The conga-IC370 provides pin header X44 for various functions.
Table 49 X44 Pinout Description
Pin Signal
Pin Type Voltage Level Termination Description
1
N.C
Not connected (assembly option for PWROK input signal)
2
BATLOW# Input
3.3 V standby
PU 10 k
Battery low (active low; indicates low external battery)
Use open drain configuration on external device
3
SDP
Output
SDP output from Intel I225 controller (for time synchronization (IEEE 1588))
4
WDTRIG
Input
3.3 V
PU 10 k
Watchdog trigger input (board controller), timer reset, active low.
Use open drain configuration on external device
5
GND
Ground
6
SLP_S3#
Output
3.3 V standby
S3 sleep control (suspend to RAM), active low
7
SLP_S4#
Output
3.3 V standby
S4 sleep control (suspend to Disk), active low
8
SLP_S5#
Output
3.3 V standby
S5 sleep control (Soft Off), active low
9
WDOUT
Output
3.3 V
PD 100 k
Watchdog output event (board controller)
10
3.3 V
Power
3.3 V standby power output (500 mA max)
Connector Type
X44: 10-pin, 1.25 mm pitch picoblade header (Molex 0533981071)
Possible Mating Connector: Molex 510211000
X1
X44
