Copyright
©
2020
congatec
AG
ICWLm12
41/62
Connector Type
X23: 20-pin USB3.1 Internal Front Panel, Key-A
5.5
SATA Connectors
The conga-IC370 provides two standard SATA 3.0 ports, an M.2 key B socket and a SATA power header.
5.5.1
Standard SATA Port
The conga-IC370 provides two standard SATA 3.0 ports (X13 and X16). The port supports:
•
SATA Gen 3 Specification with up to 6 Gb/s
•
SATA or SATADOM with appropriate cable
•
pin 7 power source for SATADOMs (disabled in the BIOS setup menu by default)
•
pin 8 power source for SATADOMs
To show SATA port activity, connect an LED to pin 1 and 3 of the front panel connector X47.
Note
1. Enable pin 7 power source in the BIOS setup menu under “Chipset ->Platform Controller Hub -> SATA and RST Configuration -> SATADOM
Power Pin 7” and select “SATADOM”.
2. To use pin 8 power source or a standard SATA HDD/SSD, disable pin 7 power source in the BIOS setup menu under “Chipset ->Platform
Controller Hub -> SATA and RST Configuration -> SATADOM Power Pin 7” and select “SATA SSD/HDD”.
Connector Type
X13, X16: Standard SATA connector
X13, X16
7 6 5 4 3 2 1