Copyright
©
2019
congatec
AG
conga-PITXq10
3/3
2
Installation
2.1
Assembly
1. Remove the back cover:
2. Mount the COM cable to the chassis
(if required)
3. Remove the blue film from the gap
pad:
4. Place the gap pad on the heat sink
and remove the transparent film
5. Place the copper block on the gap
pad (only for PN: 052557):
6. Apply the CPU thermal compound
(only for PN: 052557):
7. Connect the COM cable to the
board (if required):
8. Mount the congatec board. Screw
positions are shown below:
⑩
⑬
⑥
CPU
⑧
9. Connect LED and USB cables from
front panel to congatec board:
10. Secure the HDD protection and the
brackets to the hard drive:
11. Connect SATA cables to HDD and
mount assembly to chasis:
12. Attach the back cover and the case
feet items:
2.2
VESA Mounting
1. Attach VESA mounting screw:
2. Detach case feet items:
3. Mount the VESA bracket:
4. Align the chassis:
USB2.0 connector
Red
Orange
White
Brown
Yellow
Blue
KEY
Purple
Black
GND
- White + Red
H.D.D LED
- White
+ Green
Power LED
- White + Orange
Power
Empty Empty Empty Empty Empty
Empty
2.5” HDD / SSD
②
①
③
PN: 48000030
PN: 14000205
⑪
⑨
⑪
⑪
④