9.4.7 I/O Interface Configuration Submenu
Feature
Options
Description
Onboard Audio
Controller
Azalia
AC97
Disabled
Configure onboard audio controller for AC'97 or Azalia (Intel High
Definition Audio) mode.
Note: Azalia mode requires an external Azalia codec.
Onboard Ethernet
Controller
Enabled
Disabled
Enable / Disable the ICH7M onboard Ethernet controller.
Onboard Floppy
Controller
Disabled
Enabled
Enable / Disable the onboard floppy controller.
Floppy A
Disabled
360 KB 5¼”
1.2 MB 5¼”
720 KB 3 ½”
1.44 MB 3 ½”
2.88 MB 3 ½”
Select the floppy drive A type.
Note: When using the onboard floppy interface the floppy drive
must be connected via a non-twisted floppy cable versus a
twisted cable. The floppy drive will not function when connected
via a twisted floppy cable.
Serial Port 1/2
Configuration
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Specifies the I/O base address and IRQ of serial port 1/2.
Serial Port 2 Mode
Normal
IrDA
ASK IR
Specifies the mode for serial port 2.
IR Duplex Mode
Full Duplex
Half Duplex
Select IRDA full or half duplex function.
IR I/O Pin Select
SINB/SOUTB
IRRX/RTX
Select receiver and transmit pins for IRDA mode.
Parallel Port Address
Disabled
378
278
3BC
Specifies the I/O base address used by the parallel port.
Parallel Port Mode
Normal
Bi-directional
ECP
EPP
ECP&EPP
Specifies the parallel port mode.
EPP Version
1.9
1.7
Specifies the EPP version.
Parallel Port DMA
DMA0
DMA1
DMA3
Specifies the DMA channel for parallel port in ECP mode.
Parallel Port IRQ
IRQ5
IRQ7
Specifies the interrupt for the parallel port.
Serial Port 3/4
Configuration
Disabled
3F8/IRQ11, 2F8/IRQ10,
3E8/IRQ11, 2E8/IRQ10,
3F8/IRQ10, 2F8/IRQ11,
3E8/IRQ10, 2E8/IRQ11
Specifies the I/O base address and IRQ of serial port 3/4.
Copyright © 2006 congatec AG
X945m13
85/102