5. One-time-/day code
The CP1000 offers 2 advanced functions of codes that can be used once only and a
code that is valid for a single day.
First the codes have to be generated using the ConlanCode Generator (download
available from www.conlan.eu or on itunes and Google Play).
Enter a seed number into the first box. This can be any number from 1 to 9999999.
Then enter the numbers of digits you require the code to have (best to avoid 4 or 8
digits codes so there is no chance of conflict with Service code or Master code. The
system defaults to a 6 digit code.
Once you press the enter key, the day code will be shown on the left and a series of
one-time codes shown in the table below. Both these can be exported to a file if re
-
quired.
When the information is specified, the CP1000 can be set:
Setting the time
○
●
○
●
○ ○
○
●
○
●
●
○
○ ○
●
●
○
●
○
●
○
Activation of One-time-/day code
●
*
*
●
= on,
●
= off
○
●
○
●
○ ○
Finally, the reader must know how many digits the one-time-/day codes have and the
seed number. This is done in the same way as programming a user code: Position 198
is for seed and position 199 is for digits.
11
#
Key in the
Service code
#
Key in
07
#
Key in year
4 digits
#
Key in month
2 digits
#
Key in day
2 digits
#
Key in hours
2 digits
#
Key in minutes
2 digits
#
Key in
04
#
Key in
7
for one-time
code or
8
for day code
#
Conlan Code
Generator for
Windows, for
administration
of one-time and
day codes.
Conlan Day
Code app for
iOS and An-
droid units for
administration
of day codes
with SMS and
Email notifica
-
tion.
