Conlan Classic CP1000, User Manual

6

3.4 Programming codes/proximity tags for special functions

Programming the codes and proximity tags is described in 3.2 and 3.3. This entry acti-

vates the output(s) for 5 seconds (factory default). Only 1 user can enter at the time.

Programming the same user twice

By programming the same code/proximity tag on the same position twice toggles the 

output.

(Ie. the code/proximity tag is entered to unlock a door and entered to lock it again).

Programming the same user 3 times

By programming the same code/proximity tag on the same position 3 times, the out-

put is designated as switch on only.

(Ie. the code/proximity tag is permanently unlocked when the code/proximity tag is en-

tered).

Programming the same user 4 times

By programming the same code/proximity tag on the same position 4 times, the out-

put is designated as switch off only.

(Ie. the door is locked when the code/proximity tag is entered).

3.5 Smart reading

This position makes it possible to program codes/proximity tags quickier without 

entering new user positions. Key in a user position and it counts automatically to the 

next position. Codes and proximity tags can be programmed alternatively as you see 

fit.

○ 

●

 ○

*

●

 ○

*

 ○ ○

For more 

codes/tags 

repeat from 

here

Note:

 This programming mode overwrites existing user positions.

#

Key in the

Master code

#

Key in

05

#

Key in the start 

position

#

Key in the code 

or show tag