DATA TRANSMISSION FROM SMARTSCALE TO MOBILE DEVICE
When your SMARTSCALE has been paired up with your phone or other mobile device, your data
results will be transmitted to the device via Bluetooth. An onscreen “
” icon indicates a successful
Bluetooth® connection.
A “
” icon appears while data is transmitted, then disappears when transmission is complete. You
may review your data on your mobile device.
If the “
” icon remains on the screen, the transmission has failed. The scale will temporarily store
the pending data, and it will be transmitted after the next measurement is complete.
CONNECTION TROUBLESHOOTING
If the transmission fails, repeat the above steps. To improve the transmission connection, follow these
guidelines:
a) Place the scale and Bluetooth® device reasonably close together, between 3 and 30 feet.
b) Check for any obstacles between the scale and the Bluetooth. Obstacles may cause interference.
c) Other electronic devices may cause interference (particularly those with Bluetooth); keep them at
least 3 feet away from the scale.
NOTE: If the batteries are removed from the scale, you will not have to reconnect the scale to the app
because it will still recognize the device when you replace the batteries.
Your EatSmart SMARTSCALE Bathroom Scale can operate as a basic weight-reading scale. No
special programming is required.
1. Your scale has been set at the factory to measure in pounds and inches (lb/in). On the bottom of the
scale, there is a button that can change the measurement units to kg / st:lb . If you wish to change the
measurement units, press the button to (kg / st:lb).
2. Place the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.
3. Step onto the scale platform and remain still. Your weight will display.
4. The scale will power off automatically.
This scale has 8 personal memory numbers (P1-P8). Before estimating body fat and body water, you
must first save your height, age, gender, normal/athlete mode option and an activity level selection into
a memory number. The scale will then use these factors to estimate your results. Once you have saved
your personal data into memory, it will only need to be reentered if there is a change to the data
