Using Wi-REACH Classic
Using Wi-REACH Classic
22
3.2.4
DHCP Configuration
1
The DHCP configuration page shows:
You can change the
Base IP address
of Wi-REACH Classic, along with the
Maximum Number of Clients
that can connect to Wi-REACH Classic at the same
time.
Computers or devices connecting to Wi-REACH Classic will receive consecutive IP
addresses starting at Base IP A 1.
You may also enter a
Primary and Alternate DNS Address
as static values, or if
left empty, these values will be received from your cellular provider during the
modem connection. It is advisable to leave these values empty as DNS values may
be changed by your cellular provider from time to time.
It is also advisable to leave the
Lease Time
of the IP addresses at 60, which means
connected devices will renegotiate their IP address every 60 minutes.
2
DHCP Clients shows the IP Addresses given out by the Wi-REACH Classic DHCP
server, their MAC addresses and Host Names.