Connect Systems CS4000, User Manual

16

Radio Call 

The Radio Call key is a multifunction key 
that has the ability to generate Selective 
Calls, Call Alerts, Radio Check, Kill, and 
Active. The exact function(s) allowed is 
determined by the dealer.  

Call 1 

When the “Call 1” key is pressed, a 
preprogrammed two tone, DTMF, or MDC 
page will be sent. If the dealer programmed 
the radio for side tone, the two tone, 
DTMF, or MDC page will be heard as it is 
being transmitted.  
This is a paging feature that is used to 
contact individual radio or sometimes to set 
off certain types of alarming features. 
When you set it for  DTMF, two tone, or 
MDC  the other radio has to be able to 
receive the corresponding code. Not all 
radios have the ability to respond to 
paging. 

Call 2 

When the “Call 2” key is pressed, a 
preprogrammed two tone, DTMF, or MDC 
page will be sent. If the dealer programmed 
the radio for side tone, the two tone, 
DTMF, or MDC page will be heard as it is 
being transmitted.  
This is a paging feature that is used to 
contact individual radio or sometimes to set 
off certain types of alarming features. 
When you set it for  DTMF, two tone, or 
MDC  the other radio has to be able to 
receive the corresponding code. Not all 
radios have the ability to respond to 
paging. 

Call 3 

When the “Call 3” key is pressed, a 
preprogrammed two tone, DTMF, or MDC 
page will be sent. If the dealer programmed 
the radio for side tone, the two tone, 
DTMF, or MDC page will be heard as it is 
being transmitted.  
This is a paging feature that is used to 
contact individual radio or sometimes to set 
off certain types of alarming features. 
When you set it for  DTMF, two tone, or 
MDC  the other radio has to be able to 
receive the corresponding code. Not all 
radios have the ability to respond to