Connect Tech BlueStorm/Express User Manual
Revision 0.15
17
Connector Pinouts
Table 1: DB-9 Male Pinouts - TYPE A
This “TYPE A” DB-9 pinout applies only to the following Part Numbers:
BEG001, BEG002, BEG003, BEG004, BEG005, BEG006, BBG003, BFG001, BFG002, BDG001
Pin No.
RS-232
Signal
Direction
RS-422/485
Signal
Direction
1
DCD
input
RxD B(+)
input
2
RxD
input
TxD B(+)
output
3
TxD
output
TxD A(-)
output
4
DTR
output
RxD A(-)
input
5
SG
signal gnd
SR
signal ref.
6
DSR *
input
CTS A(-)
input
7
RTS
output
RTS A(-)
output
8
CTS
input
RTS B(+)
output
9
RI *
input
CTS B(+)
input
* DSR and RI signals not available on the BDG001
Table 2: RJ-45 Pinouts – TYPE B
This “TYPE B” RJ-45 pinout applies only to the following Part Numbers:
BBG001, BCG001
Pin No.
RS-232
Signal
Direction
RS-422/485
Signal
Direction
1
N/C
no connect
RTS (-)
output
2
N/C
input
RxD (+)
input
3
RTS
output
RTS (+)
output
4
SG
signal gnd
SR
signal ref.
5
TxD
output
TxD (+)
output
6
RxD
input
RxD (-)
input
7
Gnd
ground
Gnd.
ground
8
CTS
input
CTS (+)
input
9
N/C
no connect
TxD (-)
output
10
N/C
no connect
CTS (-)
input
RJ-45 connector
1
10
Using the cable CAGRJ4509 will send the RJ45 signals to DB-9 male
“TYPE B”
connectors. See
below for the DB-9
“TYPE B” pinouts.
Male DB-9 Connector
1
5
6
9