Connect Tech BlueStorm/Express User Manual
Revision 0.15
32
4.
Downlaod and extract the latest driver from the website. Choose what you want the wizard to
do by selecting
Install from a list or specific location (Advanced)
. Select
Next
.
5.
Choose
Include this location in the search
and browse to the folder with the .inf file extensions
in the extracted driver directory.
6.
Now select
Finish
.
The
Found New Hardware Wizard
will repeat steps 3 through 5 for each port to complete the
installation of the BlueStorm/Express serial ports. Please follow the on-screen instructions.
Installation is complete when no more dialogue boxes appear.
Verify the presence of BlueStorm/Express serial ports in your system by going to
Start
–
Control
Panel
–
System
–
Hardware
–
Device Manager
–
Multi-port serial adapters
. You should see CTI X-
PORT PCI Express UART RS232/485 listed.
Port Settings
You can now access individual port settings such as baud rate, data bits, parity, stop bits and flow
control by choosing the appropriate CTI PCI Express UART serial port under
Ports
in the
Device
Manager
. Clicking on
Advanced
while in
Port Settings
will access port settings for FIFO buffers,
Baud Rate Mapping, and RS-422/485 options (see the
RS-422/485 Electrical Interface
section for
more details.)
