background image

 

M.2 GPS  

Users Guide 

www.connecttech.com

 

 

Document: CTIM-000454 

Revision: 0.01 

 

 

Page 4 of 13 

Date: 2021-03-01 

 

Limited Product Warranty 

Connect Tech Inc. provides a 2-year Warranty for this product.  Should this product, in Connect Tech 

Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. will, at its 

option, repair or replace this product at no charge, provided that the product has not been subjected to 

abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized modification or repair.

 

 

You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business 

partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. 

must be pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number 

marked on the outside of the package and sent prepaid, insured and packaged for safe shipment.  

Connect Tech Inc. will return this product by prepaid ground shipment service. 

 

The Connect Tech Inc. Limited Warranty is only valid over the serviceable life of the product. This is 

defined as the period during which all

 

components are available. Should the product prove to be 

irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or to 

retract the Warranty if no replacement is available. 

 

The above warranty is the only warranty authorized by Connect Tech Inc.  Under no circumstances will 

Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other 

incidental or consequential damages arising out of the use of, or inability to use, such product. 

 

Copyright Notice 

The information contained in this document is subject to change without notice.  Connect Tech Inc. shall 

not be liable for errors contained herein or for incidental consequential damages in connection with the 

furnishing, performance, or use of this material.  This document contains proprietary information that is 

protected by copyright.  All rights are reserved.  No part of this document may be photocopied, 

reproduced, or translated to another language without the prior written consent of Connect Tech, Inc. 

 

Copyright 

 2021 by Connect Tech, Inc. 

 

Trademark Acknowledgment 

Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in 

this document as the property of their respective owners.   Not listing all possible trademarks or 

copyright acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the 

trademarks and copyrights mentioned in this document. 

 

 

 

Summary of Contents for M.2 GPS














Reviews: