M.2 GPS
Users Guide
Document: CTIM-000454
Revision: 0.01
Page 6 of 13
Date: 2021-03-01
INTRODUCTION
Connect Tech’s M.2 GPS is a GNSS receiver based on the very small industry standard M.2 Type-2242-S3-
B form factor. Using the USB bus, the M.2 GPS provides global positioning and time-stamp information,
while taking up little space and power within a system. Also considering the existing support for
Windows and Linux, the M.2 GPS can be easily integrated into any existing system, as well as easily
implemented into new systems.
Product Features and Specifications
Specifications
Dimensions
42 mm x 22 mm (M.2 Type-2242-S3-B)
Antenna Connector
HSC (MHF4), support for active antennas only
GPS
GPS, GLONASS, QZSS, Galileo
UBX, RTCM, NMEA protocols
I/O
TIMPULSE output synchronized with GPS time grid
WHEELTICK input (used for Automotive Dead Reckoning)
FWD input (used for Automotive Dead Reckoning)
External Interrupt Input
External Battery Input
Cables
CBG162: External I/O Cable
CBG214: HSC (MHF4) to SMA Female Cable
Antenna
MSG095, VTGPSA-9, Active GPS/GLONASS antennas only
Environmental
-40ºC to +85ºC
Warranty and Support
2 Years
Part Numbers / Ordering Information
Part Number
M2G201
M.2 GPS Receiver (Battery not included) populated with NEO-7N module
M2G202
M.2 GPS Receiver (Battery included) populated with NEO-7N module
M2G203
M.2 GPS Receiver (Battery not included) populated with NEO-M8N module
M2G204
M.2 GPS Receiver (Battery included) populated with NEO-M8N module
M2G205
M.2 GPS Receiver (Battery not included) populated with NEO-M8L module,
supports Automotive Dead Reckoning
M2G206
M.2 GPS Receiver (Battery included) populated with NEO-M8L module,
supports Automotive Dead Reckoning
