Mimic – NVIDIA® Jetson AGX Xavier™ to Jetson™ TX2/TX2i/TX1
Adapter
Users Guide
Document: CTIM-00502
Revision: 0.00
Page 14 of 16
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019-03-12
Power Consumption
Below is the theoretical maximum stand-alone power consumption of the Mimic Adapter. This does not
include the module or any other carriers.
Theoretical Maximum
Watts
Theoretical absolute maximum total draw of The Mimic Adapter (not
including Jetson™ module or any carrier)
5
The actual power consumption of the Mimic Adapter will vary depending on the application and use case.
Power to the Jetson AGX Xavier™ Module is sourced from the carrier board through the SEARAY™
connector that would normally power the NVIDIA® Jetson™ TX2/TX2i/TX1 module. This power input is
passed through the Mimic Adapter PCB to the Jetson AGX Xavier™ Module connector. This input from the
carrier is also used to derive the local power supplies on the Mimic Adapter.
Your carrier power supplies will have been designed to provide power to a NVIDIA
Jetson™ TX2, TX2i, or TX1. However these supplies will now be providing power to
the Jetson AGX Xavier™ module which can consume more power depending on the
application. It is important to qualify and measure your power delivery network to
ensure it can withstand the additional power required by the Jetson AGX Xavier™
module.
