Quark USFF Carrier User Manual
Users Guide
Document: CTIM-00080
Revision: 0.01
Page 6 of 20
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2020-02-27
Introduction
Connect Tech’s Quark platform brings a low cost deployable Jetson solution to the market. The Quark’s design
includes 2x Gigabit Ethernet, 1 x USB 3.1 (Gen 2) Type C with OTG support, 2 x MIPI CSI-2, Camera I2C
Control, 6x GPIOs, 2x PWM, 3xUART, 1x CAN, 2x I2C, 1x SPI .
Product Feature and Specifications
Feature
Description
Module Compatibility
NVIDIA® Jetson
™
Nano (
PRODUCTION MODULE ONLY
)
NVIDIA® Jetson
™
Xavier NX
(PRODUCTION MODULE ONLY)
Mechanical Dimensions
82.6mm x 58.8mm
USB Camera
1x USB 3.1 Gen 2 (Connector: USB Type-C)
MIPI Cameras
2x 2-lane MIPI CSI-2
Connector: 1-1734248-5
•
15-pin FPC 1mm Pitch Connector
•
Same MIPI connector used on Nano Dev Kit
Camera Module Manufacturer A: Leopard Imaging
Camera Module Part Number A: LI-IMX219-MIPI-FF-NANO
Camera Module Manufacturer B: e-con Systems
Camera Module Part Number B: e-CAM30_CUNANO
Camera Module Manufacturer C: Raspberry Pi Camera Module v2
Camera Module Part Number C: 913-2664
Camera Control Interface
1x I2C (Can be used for Lens Control)
Internal Debug Ports
1x UART for Debug (I/O header)
Storage
1x SD Card Slot
IO
– Ethernet
2x 10/100/1000BASE-T Uplink
IO
– USB OTG
1x USB 2.0 OTG for Flashing Capability (Type C)
IO
– UART Debug
1x Debug UART (I/O header)
IO
– UART
2x UART (I/O header)
IO
– CAN
1x CAN bus (I/O header)
IO
– I2C
2x I2C bus (I/O header)
IO
– SPI
1x SPI bus (I/O header)
IO
– GPIO
6x GPIO (I/O header)
IO
– PWM
2x PWM (I/O header)
Operating Temperature
-25°C to +85°C
Warranty and Support
1 Year Warranty and Free Support
Part Numbers / Ordering Information
Part Number
Description
NGX004
Quark USFF Carrier
