background image

Connect Tech Xtreme/104 User’s Manual 

14                                                                                                                     Revision 0.05 

Software Installation 

Xtreme/104 adapters are standard multi-port serial adapters that utilize 16C654 quad UARTS.  
In many cases, users have software that will interface directly to the Xtreme/104 adapters.  Many 
operating systems come with handlers to control access to multiple 16550 style UARTS.  If you 
require further information please contact Connect Tech 

Customer Support

 

Technical Tips: 
Your Xtreme/104 adapter may ship with a CD that includes 

howto.txt

 or 

readme.txt

 files.  Please examine these files for 

technical tips or release notes concerning installation and 
configuration of various device drivers and software utilities. 
 
If you did not receive a driver diskette or CD for your operating 
system or you require additional information, please go to the 

Download Zone

 of the 

Support Center

 on the 

Connect Tech

 

website for product manuals, installation guides, diagnostic 
utilities and device driver software. 

 

Summary of Contents for Xtreme/104 Opto

























Reviews: