Connect-Tek Over IP
25
•
Disconnect all VNC users
: in this case the users are locked-out of the system because someone has left
a VNC session connected and cannot be reached through other means, the admin user can close all
VNC connections.
VIII. How to Setup the SNMP Agent and Configuration
As you get the Admin/Setup screen, please click on
SNMP agent setup and configuration
This menu allows you to configure the
CTIP-01
so it can be recognized and managed by using
industry-standard Simple Network Management Protocol software.
IX. How to Setup RADIUS authentication
As you get the Admin/Setup screen, please click on
RADIUS authentication setup
The RADIUS server requires the IP
address, the UDP port number
(1812 -
default
or 1645) and the
shared secret. The shared secret is
used to encrypt communications
and corresponds to a shared
password for the RADIUS server
and the client machine. Two
additional servers may be defined
for backup purposes. Each server
will be tried in order, using the
indicated number of retries and
timeout period, which are
configurable on the same page.
Remember to enable RADIUS after
configuring it
. While RADIUS
authentication is enabled, the locally defined accounts on the Connect-Tek over IP module will not be used,
except for the SSH login. However, if a user name of the form “name.local” is given at the RADIUS prompt,
