Connect-Tek Over IP
55
Modem hang up. Resetting
The connection has been closed or terminated unexpectedly.
Timeout during login process. Giving up
The PPP client connecting over the modem has waited too long to complete the authentication process or
supplied an invalid user name and/or password.
Modem init chat script failed
The modem did not respond to the initialization string from the CTIP-01. You may need to change the init
string or verify the cabling and modem status.
Modem init okay
The modem has responded appropriately to the init string.
Saw PPP startup from client
A PPP authentication has occurred and a session has started.
Phone line rings!
An incoming call has been detected by the modem.
Modem answers: xxxxxxxxx
The connection speed and protocol used for a connection, as reported by the modem. The exact contents of
the message will vary depending on the modem make and model.
Appendix F The Installation of Optional CTIP -01 Rack Mounting
Bracket: RACKMT-IP
A special bracket is available for the rack-mounting
CTIP-01
. It allows rack mounting in two different
orientations ---horizontally and vertically as shown as Figure 1 and Figure 2 respectively. There is also a
rack-shelf available that mounts two
CTIP-01
systems into 1U of space.
Note: If you would like to install one CTIP-01 horizontally on
the rack, 2 brackets are necessary, please refer to Figure 1
as well.
Figure 1 Figure 2
