Quick
Start
This powerful software management tool is described in detail in the section entitled
Airloader Auto-Configuration
. For now, it is sufficient simply to use it for assignment of
the initial terminal configuration and IP address, both of which can be easily changed
later. Ensure that all of the check boxes are checked as shown above.
To assign terminal IP addresses automatically over the wireless network, check all of the
boxes as shown above. Click on the
Addresses
button and enter the desired range in the
From
and
To
boxes as shown in the following figure.
After setting the address range, click on
OK
to return to the Airloader Auto-Configuration
screen and then click on the box next to
Terminal/Group Manager
.
Supported Equipment Manual
•
June, 2006
2-11
