Installation Manual
Connect
2
Car Anywhere GSM Kit
www.connect
2
car.com
3
11.3.
Blue Wire (Pin13) / IGNITION INPUT WIRE:
...........................................................................................................18
11.4.
Black/White Wire (Pin11) ENGINE ENABLE/DISABLE output (ALSO FOR FUEL CUTOFF OR ANY OTHER
KILL SWITCH:
...................................................................................................................................................................................19
11.5.
Red/White Wire (Pin9) REMOTE START/STOP ACTIVATION output:
...............................................................21
11.6.
Yellow/White Wire (Pin7) Arm/Lock output (-100ma):
.....................................................................................21
11.7.
Brown/White Wire (Pin5) Disarm/Unlock output (-100ma):
.............................................................................21
11.8.
White Wire / ARM TRIGGER WIRE (Pin12) input (+ve):
......................................................................................22
11.9.
Gray/Ash Wire / DISARM TRIGGER WIRE (Pin10) input (+ve):
...........................................................................22
11.10.
Yellow Wire (Pin8) Door, Hood and Trunk Trigger input (+ve):
......................................................................23
11.11.
Black Wire (Pin6) the Alarm Trigger wire input (+ve):
......................................................................................23
11.12.
Purple Wire (Pin4) Battery level Monitor wire:
...................................................................................................23
11.13.
Orange Wire (Pin2) Tachometer wire (optional):
...............................................................................................24
11.14.
Green Wire Zimi Proximity Detect Wire (Pin14):
................................................................................................24
11.15.
Green/White Wire NOT CONNECTED (Pin3):
........................................................................................................24
11.16.
Orange/White Wire NOT CONNECTED (Pin 1):
.....................................................................................................24
12.
GENERAL SPECIFICATIONS OF CONNECT2CAR GSM KIT
....................................................25
Instructions on how to use or operate this device may be found in the operations manual.
This manual explains the installation and connection of this unit including its interface with an
existing remote start/security alarm system.
It is recommended that you read these simple guidelines carefully before use, in order to ensure
the safe operation of the module.
This unit should be installed by a professional automotive electronics installer
.
