The basic functionality procedure example:
Function
When the device is powered on, it will send the temperature and humidity
measurements and ask downlink message from the network. If the downlink message
is con
fi
gured and recon
fi
gure bit is 1, new settings will be adopted. In case downlink
message is not con
fi
gured, the recon
fi
gure bit is 0 or the downlink message cannot be
read, the previous settings will remain.
The transmission interval time and adaptive power control function can be set through
downlink message. After the downlink request, the device sends only uplink messages
for next 24 hours. After every 24 hours, the device will send downlink request again
within next payload transmission.
6
