• Pull the old batteries away from the device. Tape the
ends of the old batteries to avoid short circuits
when recycling.
• Put new batteries into place. The polarity of the
batteries is the same on all three batteries.
• Installing batteries incorrectly might break the
device. If you are not absolutely certain of polarity,
please contact your dealer.
Ensure all the batteries are installed the same way.
!
By Example, 1.5 alkaline batteries will not work.
!
• The device uses three (3) pieces of 3.6V, 2700mAh
Lithium batteries. You can purchase the suitable
replacement batteries from your dealer. Do not try to
use other type of batteries.
• Open the device by removing two screws on the
backplate. Use PZ1 type screwdriver.
Replacing Battery
9
