Downlink
• Settings of the device can be updated with the downlink message
• Device requests new settings approximately every 24 hours
• You must be very careful when you update the settings
• settings affect both the subscription and the battery life of the device!
• Downlink message is optional
• If any downlink message is not received, device continues with the current settings
• Detection interval and how often messages are sent when the space is available or
occupied can be adjusted with the settings
•
Default settings when device has not been configured with downlink:
•
Default activity reporting period is 22minutes
•
When the space is occupied, a message is sent after every activity period with updated counter
values
•
When the space becomes available the status will be sent after Inactivity Detection Period. The
default value is 15minutes.
•
After inactivity message has been sent, the device goes to Inactivity mode: when activity is detected,
status message will be sent immediately with counters increased and activity mode starts
•
Default inactivity reporting period is about eight hours
•
After inactivity period has expired without activity detected, the status message is sent without
counters increased and new inactivity period
starts
•
If the power control feature is set on, the device will automatically adjust the
transmit power to optimum level to save battery and create less unnecessary
interference to radio network
•
By default power control is OFF
•
When power control is OFF, full TX power is used