• After attaching the screw plate, place the device to screw plate so that the pins
fall through twist-holes on the bottom of the device and twist clockwise until the
device locks into place.
Picture 6. Attach device to the screw plate by twisting clockwise
•
For work desk installation, make sure the hinge of the screw plate is pointing to
metal support structure (if any). Attach the device to screw plate pins so that the
antenna is pointing away from metal structure and twist gently clockwise until
device locks in place. Avoid placing the antenna closer than 15cm to any metal
objects.
Picture 7 and 8. Antenna placement inside the device
Antenna
Antenna