Assembling and Installation
• Save the identifier and the key of the device.
• The identifier and the PAC key are on the label on the side of the device. You
can also read the identifier and the PAC key using the QR code.
• Slide the battery holder apart from the enclosure. Install 3.6V lithium batteries
to the battery holder.
Ensure the both batteries go same way. Please note
the polarity! Putting batteries improperly, the device will be damaged
and warranty will be void!
• Slide the battery holder back to the enclosure and push it deeply enough for the
holes in the holder and the casing to match each other.
+
+
-
-
