Connected IO, CONFIDENTIAL
7
CIO Router: CR48NA User Manual
Revision: 1.0
10
Cellular Antennas
SMA connector for both Primary and Auxiliary antenna Ports
11
Wi-Fi LED, Orange: Wi-Fi is connected/Off: No Wi-Fi
Power LED, Yellow: Power is connected/Off: unit is off
Cellcular Connection Strenght Indicators, Green: Cellcular
Connection
The following table lists the signal strength range corresponding to
the number of LEDs lit:
5-LEDs On: Excellent
4-LEDs On: Very Good
3-LEDs On: Good
2-LEDs On: Fair
1-LED On: Weak
No-LEDs: Not functional
2.2.
Radio Configurations
Model Name
LTE Band (MHz)
3G (MHz)
Wi-Fi
CR48NA
B2: 1900
B4: AWS 1700
B5: 850
B12: 700
B13: 700
B2: 1900
B5: 850
Yes, 802.11 a/b/g/n /ac
compliant
3.
System Configuration
3.1.
Initial IP Setup
The Router Management GUI can be accessed through the Ethernet ports with the default IP address of
192.168.71.1
.
To configure The Router, follow the following sequence:
•
Connect the Ethernet cable between the computer and The Router LAN port
•
Setup the desktop as a static IP in
192.168.71.
x domain or DHCP client to get IP from The Router
•
Open a browser and type http://
192.199.71.1
to start the settings
On login page, you can just click the Login icon to enter the GUI as shown in Figure 1. Default username
is “root” and
d
efault password is “password”
, it is recommended that a new password be created under
Web GUI Administrator->Administration page.
