ER-2000 Quick Installation Guide
Page 5
© 2018
–
Connected IO, Inc.
Planning the Installation
Proper selection of the installation site is important for performance, safety, and aesthetics. In this topic we will
look at the factors that go into a proper site selection.
Determining the Location of the LTE Tower
To maximize performance, you need to choose a location that is accessible to the LTE tower, Ethernet network
components, and connected devices. It is important to verify that you do not exceed the distance capabilities of
the ER2000. If you are unsure of the distance between the two points, you can use a measuring device such as
range finders. You can also look at the architect’s site plan or contact a local surveying service for assistance.
For LTE, it’s as simple a
s looking at the signal strength LEDs on the RU. 4-5 bars indicates an acceptable signal
and, therefore, an acceptable mounting location. If this location is fixed and above objects moving in the
environment, is should be a satisfactory.
For Ethernet and Ethernet-enabled connected devices, you must be within 300 feet, cable-wise, of the RU.
For WiFi, a smartphone with a WiFi signal Strength meter can tell you about the performance at a given location
in the environment relative to the ER2000 RU.
Mounting the RU high up on a wall will tend to improve the wireless performance, while mounting it under a
metal desk will detract. In certain cases where the RU cannot be mounted in an ideal location, an external, high-
gain antenna can be used that overcomes performance limitations. Please contact your Connected IO
representative to learn more.
