DX-1S Digital PABX - Programming Manual
3-4
3.9
SWITCH TO MANAGEMENT MODE WITHOUT SAVING PROGRAMMING DATA TO
FLASH
This operation is to use the programming command to exit the Programming Mode and switch to
Management Mode without saving the programming data.
Operation
1.
Enter “88” and then press “Enter”.
2.
Then the message “Program data NOT save" and << Management Mode >> will display.
3.
The screen will change to Management Mode.
Remark
1.
Since the programming data have not been saved to FLASH PROM in this case, if the data in RAM
is lost and the system will not be able to recover the data automatically.