DX-1S Digital PABX - Programming Manual
5-2
This item is to choice a cadence pattern for the system to use as busy tone.
Command
3 * 4 * Value <Enter>
where Value = 0 : (0.35s on + 0.35s off) periodically
Default Value
Default = 0
5.1.6
PROGRAMMING ITEM 5 : RINGING TONE TYPE
This item is to choice a cadence pattern for the system to use as Ringing Tone.
Command
3 * 5 * Value <Enter>
where Value = 0 : (1s on + 4s off) periodically
Default Value
Default = 0
5.1.7
PROGRAMMING ITEM 6 : FEATURE ACTIVATION DIAL TONE TYPE
This item is to choice a cadence pattern for the system to use as Feature Activation Dial Tone.
Command
3 * 6 * Value <Enter>
where Value = 0 : (0.4s on + 0.05s off) periodically
Default Value
Default = 0
5.1.8
PROGRAMMING ITEM 7 : CONFIRMATION TONE TYPE
This item is to choice a cadence pattern for the system to use as confirmation tone.
Command
3 * 7 * Value <Enter>
where Value = 0 : two burst of (0.2s on, 0.2s off)
Default Value
Default = 0
5.1.9
PROGRAMMING ITEM 8 : CALL WAITING TONE TYPE
This item is to choice a cadence pattern for the system to use as call waiting tone.
Command
3 * 8 * Value <Enter>
where Value = 0 : two bursts of (0.2s on, 0.2s off)
Default Value
Default = 0
5.1.10 PROGRAMMING ITEM 9: INCOMING TRUNK CALL RINGING TYPE
This item is to choose a cadence pattern for the system to use as incoming trunk call ringing.
Command
3 * 9 * Value <Enter>
where Value = 0 : (0.4s on + 0.2s off + 0.4s on + 4s off) periodically
Value = 1 : (1s on + 4s off) periodically
Default Value
Default = 0
