DX-1S Digital PABX - Programming Manual
5-19
Condition
1.
When this feature is enabled, the SMDR Start Time should set to 1 second.
Default Value
Default = 0 for 1 ~ 60 trunks
Related Topic
1.
Programming Item 36 - SMDR Start Time
5.3 PROGRAMMING ITEM 63 : TRUNK TYPE - DAY
This item is to program the trunk line to be answered as Normal, DISA, DISA & Fax Detection in Day
Mode, Normal with No Answer Announcement or Network Trunk in day mode.
The system will transfer the incoming call to preset Trunk Call Answering Extension or Hunting Group
for the trunk programmed as Normal.
The system will answer the incoming call with DISA Voice Card for the trunk programmed as DISA.
The system will answer the incoming call with DISA Voice Card and detect if it is a fax call for the trunk
programmed as DISA and Fax Detection.
The system will answer the incoming call with Trunk No Answer Message in DISA Voice Card when the
call has not been answered within Trunk No Answer Timeout for the trunk programmed as Normal with
No Answer Announcement.
The system will use the trunk as networking trunk in Loop Start Networking feature for the trunk
programmed as Network Trunk.
The system will answer the incoming call and perform the Automatic Call Distribution (ACD) operation
when the call has not been answered within Trunk No Answer Timeout for the trunk programmed as
ACD with Voice Message.
If E&M Card is installed in system, it is required to specify the Magneto Trunks for proper operation.
Command
3 * 63 * Index1 * Value <Enter> or
3 * 63 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 0 : Normal
Value = 1 : DISA
Value = 2 : DISA and Fax Detection
Value = 3 : Normal with No Answer Announcement
Value = 4 : Network Trunk
Value = 5 : ACD with Voice Message
Default Value
Default = 0 for 1 ~ 60 trunks
Related Topic
1.
Programming Item 64 - Trunk Type - Night
2.
Programming Item 65 - Trunk Call Answering - Day
