DX-1S Digital PABX - Programming Manual
5-25
5.4.12 PROGRAMMING ITEM 76 : CALLER ID CHANNEL
When Caller ID Card (CIC) is installed in system, it is required to connect CIC channels to trunk port
(C.O. line) for incoming trunk call caller ID display.
This programming item specifies which CIC channel is connected to trunk.
Command
3 * 76 * Index1 * Value <Enter> or
3 * 76 * Index1 * Value * Index2 <Enter>
where Index1 = 1 ~ 60 : trunk number
Index2 = 1 ~ 60 : trunk number <Optional>
Value = 0 : no caller ID for this trunk
Value = 1 ~ 8: caller ID channel used
Default Value
Default value = 0 (no caller ID)