2
Connects2
Vision
www.c2vision-eu.com
INSTALLATION
1. Connect the Black wire to a suitable ground and the Red wire to a switched
+12V supply.
2. If the camera is to be used in the rear of the vehicle, the Red wire should
be connected to the reversing light circuit or an interface which provides a
reverse signal.
3. Select a suitable location for the camera and ensure that the area is free
from all cables, fuel and oil. Whenever possible, avoid locations that are
subject to road dirt and water spray.
4. Use the adhesive sticker to mount the camera in the desired location
5. Using the supplied video cable, connect the camera to the display screen
and ensure that the image is displayed correctly.
6. Adjustment of the camera may be required to ensure that the correct angle
of the image is achieved.
CONTENTS
• Night Vision Camera
• Power Cable
• Video Cable
• Adhesive Mounting Sticker
Subscribe to our YouTube Channel for installation
guides and tips...
www.youtube.com/connects2
