.
Page 224
15/09/2004
PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
5.7.2
GLOBAL RESET (MENU 5-7-2)
For the Call Manager (F5): Menu 5-4-2 (Global reset)
ALARMS CONFIGURATION RESET
DETECTION
IN LOCAL
SITE
REPORTED
TO
SET
NOT
TRANS.
REPORTED
TO
KEY
NOT
TRANS.
REPORTED TO TICKET
NOT URGENT
REPORTED TO CENTRAL.
NOT URGENT
REPORT TO X25 ADDRESS
NOT TRANS.
RESET
CONFIRMATION YES
----------------------------------------
Figure 213: Configure the alarms: global reset
This reset menu is used to define default processing for all LSB groups and alarms.
DETECTION IN
LOCAL SITE
ANOTHER SITE
Select the local site if the reset is for alarms detected locally, or another site if the reset is
for alarms detected in other sites and due to centralisation of the logbook.
Note:
This field only appears in multi-site configuration.
REPORTED TO SET / KEY / TICKET / CENTRAL.
KEYING
NOT TRANS.
NOT URGENT
URGENT
ADDRESS 1
ADDRESS 2
TO 2 ADDR
Define for each output the default processing for all LSB groups and alarms.
REPORT TO X25 ADDRESS
NOT TRANS.
ADDRESS 1
ADDRESS 2
TO 2 ADDR
Define for the X.25 Address output the default processing for all LSB groups and alarms.
RESET CONFIRMATION
YES
NO
Select YES to reset and press Enter to confirm.
