Remove battery door:
Place fingers on flat surfaces in housing.
Gently push down on battery door to remove.
1.
To replace the bristle head:
Align the angled surfaces on the back side of the bristle
head to the angled surfaces on the center pin of the
housing.
Use the alignment indicator as a guide.
Gently push the bristle head onto the center pin until it
locks in place.
6.
To Remove the Bristle head:
Insert a small tool into the slot on the top
of the bristle head. Gently rotate the tool
to pop the bristle head off the housing.
To replace the bristle head:
Align the angled surfaces on the back side of the bristle
head to the angled surfaces on the center pin of the
housing.
Use the alignment indicator as a guide.
Gently push the bristle head onto the center pin until it
locks in place.
6.
To Remove the Bristle head:
Insert a small tool into the slot on the top
of the bristle head. Gently rotate the tool
to pop the bristle head off the housing.
