www.conotec.co.kr
second
Version 1.3(2015. 4.15)
O
1 stage/2 stage
control selection
press for more
than 5 seconds
Detailed manual
Setting program
open 1 ON
time setting
lighting when setting
the “ minute ”
Setting time
lighting when setting
the “ second ”
open 1 OFF
time setting
open 1
temperature
seting
close 1
temperature
setting
Lock
Unlock
but, except for
the set value
correct the
between the
displayed and
the actual
value
Setting temperature
The function of each key
A key to change of the setting temperature and program
Second
Parts Name
A key to change of the setting time
A key to change of the setting values
Open
Close
Output ON
Output OFF
Minute
Time
Setting UP
Setting temperature
Setting DOWN
Manual for Digital Temperature Controller
Patent Reg. No. 0441398
Model Sensor Control
output
Relay
contact
Temperature
range
Function
Control by
temperature
and time
Thank you for purchasing CONOTEC product.
This user manual is provided to prevent product
damange by carelessness and to inform the users
of exact way of operations. Please keep it well
and refer to it when you have any question
in using the product.
Setting of Open 1 temperature
ctivated when the present temperature is higher than the setting temperature ( ).
Setting of Close 1 temperature
ctivated when the present temperature is lower than the setting temperature ( ).
Setting of Open 2 temperature
ctivated when the present temperature is higher than the setting temperature ( ).
It is indicated only when setting the : 2
Setting of Close 2 temperature
Setting of “ ON ” time for Open 1 operation
Setting of
“ OFF ” time for Open 1 operation
Setting of “ ON ” time for Close 1 operation
Setting of “ OFF ” time for Close 1 operation
Setting of “ ON ” time for Open 2 operation
when it
operates
Setting of “ OFF ” time for Open 2 operation
Setting of “ ON ” time for Close 2 operation
resent
temperature
It is indicated
only when
setting
setting of
Close 2
temperature
setting of
Open 2
temperature
setting of
“ON” time for
Close 1 operation
setting of
“OFF” time for
Close 1 operation
It is indicated
only when
setting
setting of
“ON” time for
Open 2 operation
setting of
“OFF” time for
Open 2 operation
setting of
“ON” time for
Close 2 operation
setting of
“OFF” time for
Close 2 operation
Present
temperature
※
Press the Key continuously for 5 seconds under the current temperature indicating condition to change to Program Setting Mode.
※
All data memory is to be completed automatically after 10 seconds if pressing KEYS for 2 seconds or no pressing keys.
deviation is
not applied
at the set
time
unit selection
time
unit selection
when it
operates
,
When the current temperature is
more than the value 1 stage and
2 stage, 2 stage control takes
priority.
Output OFF time after time elapsed of No. 7
set at
set at
ctivated when the present temperature is lower than the setting temperatur
.
e
If setting as , the set value will be
It is indicated only when setting the : 2
If setting as , the set value will be
Output OFF time after time elapsed of No. 5
Output OFF time after time elapsed of No. 9
A
A
A
A
p
