3
Operating Instructions
2-Way Socket Strip with 3x USB-A, Pink
Item no: 2368895
1 Intended use
The product is a 2-way protective contact socket strip with 3x USB-A outputs. Mounting holes are integ-
rated into the product.
The product is intended for indoor use only. Do not use it outdoors.
Warning labels are included in the package. Stick a label in your language over or next to the lan-
guage label on the product.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
Risk of electric shock!
This product must only be used in dry, enclosed indoor areas. It must not become damp or
wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.3 Product
■
Do not connect the product in series!
■
Do not operate the product while covered.
■
De-energised only when unplugged.
■
Take special caution when children are around. Children cannot recognize the danger arising from
the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!
■
Only use in dry rooms.
5.4 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from direct sunlight.
5.5 Mains cable
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket
using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an extended period of
time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mech-
anical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged mains
cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker) and then
carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the
manufacturer or a similarly qualified person, so as to prevent any danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of in-
jury.
5.6 Sockets
■
The product is equipped with an enhanced protection against accidental contact. An integrated mech-
anism will release the holes of the receptacle only, if the two prongs of a power plug are inserted into
the two holes at once.
6 Mounting
When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or
pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening
danger of an electric shock!
7 Protection (USB ports)
7.1 Overcharge protection
Protects connected devices against overcharging.
■
Charging will stop when the connected device is fully charged.
■
Charging will resume when the connected device requires charging.
7.2 Short-circuit protection
Protects against overcurrent because of short circuit.
■
When triggered the power supply to the port(s) will be interrupted.
■
The power supply will resume when the condition(s) triggering the protection are removed.
7.3 Over voltage protection
Protects connected devices against voltages exceeding the rated output.
■
When triggered the power supply to the port will be interrupted.
■
The power supply will resume when the condition(s) triggering the protection are removed.
8 Cleaning and care
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
9 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
10 Technical data
Rated input ............................................
230 V/AC, 50 Hz, 16 A
Rated power ..........................................
max. 3680 W
USB output ...........................................
3x USB-A (shared output): 5 V/DC, 3.2 A max. 16 W max.
Cable type .............................................
H05VV-F 3G1.5 mm²
Cable length ..........................................
1.5 m
Consumers ............................................
3x USB-A ports
2x Mains sockets
Enhanced protection against accidental
contact...................................................
Yes
Socket controls ......................................
no
Protection (USB)....................................
3x USB-A: over voltage cut-off, short-circuit protection, over-
charge cut-off
Operating conditions..............................
-10 to +50 °C, 10 - 90 % RH (non-condensing)
Storage conditions.................................
-10 to +50 °C, 10 - 90 % RH (non-condensing)
Dimensions (L x W x H) ........................
154 x 54 x 40 mm
Weight (approx.) ...................................
322 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2368895_V3_0821_dh_mh_en
