Safety and Hazard Instructions
In case of damage resulting from the non.observance
of these operating instructions, the warranty lapses!
We will not assume any responsibility for consequen-
tial damage! We do not accept any liability for perso-
nal injury or damage to property caused by incorrect
handling or non-observance of the safety instruc-
tions! The warranty will lapse in these cases.
This device left the factory in perfect condition in terms of safety
engineering.
To maintain this state and ensure safe operation, the user must
observe the safety instructions and warnings contained in these ope-
rating instructions.
The following symbols must be observed:
A triangle containing an exclamation mark indicates
important information in these operating instructions
which is to be observed without fail.
The lightening symbol in a triangle warns against an
electric shock or the impairment of the electrical safety
of the device.
☞
The “hand” symbol indicates special information and
advice on operation of the appliance.
For safety and certification (CE) reasons, unauthorized modifica-
tions and/or changes to the soldering station are not permitted.
Only an expert may replace damaged power cables.
The soldering station is designed in protective class 2. Make sure
the insulation of the casing is neither damaged nor destroyed.
21
