12
8. Registering the remote control to the
‘FAZ-Z’ alarm base station
The remote control must be registered to the alarm base station to ensure that
the ‘FAZ-Z’ alarm base station responds to the ‘FAZ3000-FB-2’ remote control.
The alarm base station stores the security code of the remote control.
As a result, the ‘FAZ-Z’ alarm base station responds to the
‘FAZ3000-FB-2’ remote control only if the received security code
matches the security code stored in the alarm base station.
Proceed as follows to register:
•
You must be on the top level. The LCD should
appear as on the right, for example, with the time
and the date.
•
Briefly press the ‘
Menü a/A
’ button on the control
unit of the ‘FAZ-Z’ alarm base station.
•
Use the ‘
y
’ and ‘
z
’ buttons to select the
‘
sensors
sensors
sensors
sensors
sensors
’ menu.
•
Confirm by briefly pressing the ‘
OK
’ button.
‘
sensors add
sensors add
sensors add
sensors add
sensors add
’ appears, see the figure to the
right.
•
Press the ‘
OK
’ button again.
Here ‘
X
’ is the number of sensors that have
already been registered plus one (if no sensor has
been registered yet, then X=1).
•
You can use the ‘
x
’ button to select the remote
control; the display in the upper row shows
‘
rem.con. 1
rem.con. 1
rem.con. 1
rem.con. 1
rem.con. 1
’.
sensors
disarm
16:30 14.12
troubles
sensors
add
sensor X
clear
rem.con. 1
clear
Summary of Contents for FAZ3000-FB-2
Page 23: ...23...
