Attention!
The measuring function switch must not on any
:
count be positioned on voltage measurement
during current measurement.
b)
socket
For DC or AC current measurement up to 400
maximum, the
red test lead must be plugged in here when the measurement
function switch (4) is set either to 4mA or 400mA during current
measurement.
c) COM = Common socket
The black test lead must be plugged in here for all measure-
ments except transistor or temperature measurement (common
socket means minus or
or earth socket)
d) V/Ohm socket
The red measuring lead must be plugged ‘into this socket to
carry out voltage, frequency or resistance measurements, conti-
nuity checks and diode tests.
e) Measuring function switch (4) or rotary switch
Attention!
The measuring function switch must not on any
.
count be moved during measurement, as this can
damage the measuring instrument (separation ar-
cing) and as a result the user may be endangered in
the case of voltages greater than 25
or 35
VDC.
Arranged in a half circle, the different measuring ranges can be se-
lected by turning the switch:
DC voltage measurement (auto range)
46
