= AC voltage measurement (auto range)
Ohm ((+)) = Continuity testing and resistance measurement (auto
range)
-<-
= Diode test (no auto range)
= DC current measurement to 4
max. (no auto
range
= DC current measurement to 400
max. (no auto
range)
= DC current measurement to 20 A max. (no auto
range)
= AC current measurement to 20
max. (no auto
range)
= AC current measurement to 4
max. (no auto
range)
= AC current measurement to 400
max. (no auto
range)
C 4 Display explanation and symbols
a) Digital Anzeige
The display can indicate up to “3999” and (with negative volta-
ges or reversed polarity) the polarity is automatically indicated
There are also three decimal point positions.
b) Analogue bar graph
The analogue bar graph consists of 42 segments. It has a some-
what higher measuring speed than the digital display. This allows
measured value trends to be more easily recognised than with an
analogue multimeter, but without its mechanical disadvantages
(damping of the measuring unit).
If the measurement range is exceeded, then
for overload,
is displayed. The arrow on the display to the right of the bar
graph flashes.
47
