48
Setting the sensitivity for the weather forecast icons
For regions with rapidly changing weather conditions, the switch sensitivity for the weather icons can be adjusted for
a faster display of the modified conditions.
If not already done, activate the setting mode by pressing the "SET" button, as described in the
beginning of chapter 10.b). The set value for the display contrast flashes. Release the "SET" button.
Briefly press 12x the "SET" button.
In the lower part of the display (underneath the weather icons) the sensitivity value flashes (basic setting
is "3"); the arrows flash left and right next to the weather icons.
Select by pressing the "OUT/+" button the desired value (2, 3 and 4 are possible).
The value indicates the barometric pressure change in hPa, which switches the weather icons to another state. The
value 2 represents the most sensitive setting (fastest), the value 4 the least sensitive setting (slowest).
By briefly pressing the "SET" button, the setting mode can be quitted. The same is valid if no button is actuated for
approximately 15 seconds. The value of the sensitivity setting is saved correspondingly.
