52
k) MAX/MIN display for outdoor temperature/outdoor humidity
Briefly press the "OUT/+" button in order to switch between the display of the MAX values, the MIN values and the
present measured values.
The Max and the MIN value at the time of occurrence (time and date) will be indicated in the display simultaneously.
In order to erase the MAX or the MIN value, press the "SET" button for approximately 3 seconds while the
corresponding value is indicated in the display. The saved value will be reset according to the present measured
value.
I) Switching the display with more than one outdoor sensor
If you are using more than one outdoor sensor, you can switch the display of the outdoor temperature/outdoor
humidity by briefly pressing the "SNOOZE/CH" button until the desired sensor number appears.
Up to three sensors can be operated and displayed via the weather station (e.g. a sensor in the outdoor area, one
in the cellar and one in the garage).
m) Battery status display
If the batteries of the weather station are spent, a small battery symbol appears between the display of the indoor
temperature and the indoor humidity.
Replace the old batteries with new ones as described in chapter 7 and 9. The spent batteries can be used for ex. in
flash lights, radios or clocks. Dispose of the empty batteries in an environmentally friendly way; see chapter
"Disposal".
