36
37
6. Operating elements
You will find the respective illustrations on page 3.
A) Function keys
1: SET button
4: ALM button
: MIN/MAX button
5: SNOOZE/SUN button
3: CH/+ button
B) LCD elements
A: DCF tower icon (for time reception)
I: Outdoor temperature in ºC
B: Time
J: Transmitter low battery icon
C: Calendar
K: Indoor relative humidity %
D: Moon phase display
L: Indoor temperature ºC
E: Sunrise / sunset display
M: Weather clock low battery icon
F: Weather forecast icon (Weather man)
N: Weather tendency icon
G: Outdoor reception signal
O: Alarm icon
H: Number showing transmitter unit
7. Operation
The receiver can receive up to three transmitters. However, only one is included in the delivery
of this product.
Use of an outside transmitter
First, insert the batteries into the outside temperature transmitter.
Insert the batteries into the weather station at the latest within 30 seconds. Once the batteries
are inserted, all display elements of the LC display then become visible briefly. Subsequently
the time is displayed as 0:00 and the weather girl symbol is displayed. If there is no display
within 60 seconds, then remove the batteries and insert them again after a period of at least
10 seconds.
After insertion of the batteries, the weather station begins to receive data from the outside
transmitter. The temperature of the outside area and the signal reception symbol should now
be displayed on the weather station. If this does not happen within 3 minutes, then all batteries
have to be removed and a new basic setting from Step 1 has to be undertaken.
To ensure a sufficient 868 MHz signal transmission, it is necessary to maintain a distance of
no more than 100 meters under good conditions between the final installation locations of the
weather station and the outside transmitter.
Using more than one outside transmitter
If the original basic setting was undertaken with only one outside transmitter, then the user
should remove all batteries from the weather station and wait at least 60 seconds.
Then insert the batteries into the first outside transmitter.
Within 30 seconds after activation of the first outside transmitter, insert the batteries into
the weather station. Once the batteries are inserted, all display elements of the LC display
become visible briefly. Subsequently the time is displayed as 0:00 and the weather girl symbol
is displayed. If there is no display within 60 seconds on the LC, then remove the batteries and
insert them again after a period of at least 60 seconds.
The temperature of the first outside transmitter (Channel 1) should now be displayed on the
weather station. In addition, the signal reception symbol should be displayed. If this does not
happen within minutes, then all batteries have to be removed from both units and a new basic
setting from Step 1 has to be undertaken.
After the temperature data from the first outside transmitter is displayed on the weather station,
insert the batteries into the second outside transmitter.
The batteries should be inserted into the second transmitter at the latest within
10 seconds after reception of outside area data from the first transmitter.
The data from the second outside transmitter and the symbol “Channel ” should now be
displayed on the weather station. If this does not happen within minutes, then all batteries
have to be removed from all units and a new basic setting from Step 1 has to be undertaken.
1.
.
3.
4.
1.
.
3.
4.
5.
6.
