background image

Thank you

 for selecting the DR-1 data reader as the compact disc

transport for your audio system. It is ideally suited for use in combination
with any of conrad-johnson’s digital/analog converters, to form a com-
pact disc playback system capable of extracting all the detail and
dynamics of the best digital recordings.

At conrad-johnson, we expect our products to be a source of satisfaction
and of pride to their owners for many years to come. Accordingly, circuit
designs, parts and materials for all conrad-johnson products are se-
lected with a view to maintaining optimal performance over the years.
Our reputation for producing among the industry’s most reliable compo-
nents is a natural consequence of this engineering approach.

Although the DR-1 has been designed so that its basic operation is
intuitively apparent, it has a number of sophisticated features which are
fully explained in this manual. Please take a few minutes to read the
manual to better understand the features and capabilities of your DR-1.

In closing, we’d like to welcome you to the family of conrad-johnson
owners. We want you to enjoy your conrad-johnson product to the
fullest. To this end, our staff stands ready to answer any questions you
may have about the function and application of your DR-1, and to
provide any needed service both during, and after the warranty period.
Our goal is to heighten your enjoyment of recorded music.

DR-1 Owner’s Manual

1

Summary of Contents for DR-1












Reviews: